12
янв
The Fujifilm Dimatix DMP-2800 ink-jet printer is a cost-effective, easy-to-use precision materials deposition system. Ideal applications for the materials printer include: - Material and fluid development and evaluation - Prototype and sample generation - Fluid and substrate interactions evaluation - Product development - Optimization and evaluation of digital patterns - Deposition of biological fluids including cell patterning, DNA arrays, proteomics The DMP-2850 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. The DMP-2850 offers a variety of patterns using a pattern editor program. Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation.
Dimatix Materials Printer DMP-2850 Data Sheet Data & Spec Sheets for Dimatix Materials Printer DMP-2850; Not what you were looking for? Contact Fujifilm with your question about Dimatix Materials Printer DMP-2850. Cleanroom: Fujifilm DMP-2800 Dimatix Printer. Smash mouth songs. Reserve Equipment. Deposition of fluidic materials with typical drop sizes of 1 and 10 picoliters.
Fiducial camera features: - Substrate rotation alignment using reference marks - Positioning of the print origin to match substrate placement - Measurement of features and locations - Inspection and image capture of printed pattern or drops - Cartridge alignment when using multiple cartridges - Matching drop placement to previously patterned substrate.
FUJIFILM Dimatix introduces new DMP-5000 series Materials Printer Tuesday, November 30, 2010 Press release from the issuing company Santa Clara, Calif. - FUJIFILM Dimatix, the leading provider of industrial inkjet printheads, components and systems, introduced today its new Dimatix Materials Printer (DMP). The new DMP-5000 is a large format, non-contact, fluid deposition system capable of jetting a wide range of functional fluids using multiple FUJIFILM Dimatix fluid deposition printheads interchangeably. The new DMP-5000 features a printable area of 500 x 500 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm respectively. The DMP-5000 uses a temperature controlled vacuum platen to accurately register, maintain and thermally manage substrates during printing.
These substrates include plastic, glass, ceramics, and silicon, as well as flexible substrates ranging from membranes, gels, and thin films to paper products. The printer includes an integrated drop visualization system that captures droplet formation images dynamically as droplet ejection parameters are adjusted to produce a tuned printhead and fluid combination. Also, sophisticated electronics allow the printhead to be calibrated on a per nozzle basis to compensate for any channel-to-channel variability. A second camera system allows substrate measurements and alignment, observations of fluid drying behavior, with droplet measurement and placement calculations. The DMP-5000 joins the FUJIFILM Dimatix DMP-2800 and DMP-3000 printers introduced in 2005 and 2009, respectively.
All three printer systems come with a drop watcher, fiducial camera, heated vacuum platen, automated printhead maintenance and cleaning, PC, monitor and easy to use software. The DMP-2800 is a bench-top system designed for micro-precision jetting of functional fluids onto virtually any surface. It can build and define patterns over an area of 200 x 300 mm onto substrates up to 25 mm thick using single-use printhead cartridges that researchers can fill with their own fluids. Similar in features and operation to the DMP-2800, the floor standing DMP-3000 with its high precision motion control is an inkjet deposition system that can jet fluids using both cartridge-based printheads for small manufacturing volumes to high performance printheads for industrial, high throughput requirements. The DMP-3000 has a printable area of 300 x 300 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm, respectively.
Popular Posts
The Fujifilm Dimatix DMP-2800 ink-jet printer is a cost-effective, easy-to-use precision materials deposition system. Ideal applications for the materials printer include: - Material and fluid development and evaluation - Prototype and sample generation - Fluid and substrate interactions evaluation - Product development - Optimization and evaluation of digital patterns - Deposition of biological fluids including cell patterning, DNA arrays, proteomics The DMP-2850 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. The DMP-2850 offers a variety of patterns using a pattern editor program. Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation.
Dimatix Materials Printer DMP-2850 Data Sheet Data & Spec Sheets for Dimatix Materials Printer DMP-2850; Not what you were looking for? Contact Fujifilm with your question about Dimatix Materials Printer DMP-2850. Cleanroom: Fujifilm DMP-2800 Dimatix Printer. Smash mouth songs. Reserve Equipment. Deposition of fluidic materials with typical drop sizes of 1 and 10 picoliters.
Fiducial camera features: - Substrate rotation alignment using reference marks - Positioning of the print origin to match substrate placement - Measurement of features and locations - Inspection and image capture of printed pattern or drops - Cartridge alignment when using multiple cartridges - Matching drop placement to previously patterned substrate.
FUJIFILM Dimatix introduces new DMP-5000 series Materials Printer Tuesday, November 30, 2010 Press release from the issuing company Santa Clara, Calif. - FUJIFILM Dimatix, the leading provider of industrial inkjet printheads, components and systems, introduced today its new Dimatix Materials Printer (DMP). The new DMP-5000 is a large format, non-contact, fluid deposition system capable of jetting a wide range of functional fluids using multiple FUJIFILM Dimatix fluid deposition printheads interchangeably. The new DMP-5000 features a printable area of 500 x 500 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm respectively. The DMP-5000 uses a temperature controlled vacuum platen to accurately register, maintain and thermally manage substrates during printing.
These substrates include plastic, glass, ceramics, and silicon, as well as flexible substrates ranging from membranes, gels, and thin films to paper products. The printer includes an integrated drop visualization system that captures droplet formation images dynamically as droplet ejection parameters are adjusted to produce a tuned printhead and fluid combination. Also, sophisticated electronics allow the printhead to be calibrated on a per nozzle basis to compensate for any channel-to-channel variability. A second camera system allows substrate measurements and alignment, observations of fluid drying behavior, with droplet measurement and placement calculations. The DMP-5000 joins the FUJIFILM Dimatix DMP-2800 and DMP-3000 printers introduced in 2005 and 2009, respectively.
All three printer systems come with a drop watcher, fiducial camera, heated vacuum platen, automated printhead maintenance and cleaning, PC, monitor and easy to use software. The DMP-2800 is a bench-top system designed for micro-precision jetting of functional fluids onto virtually any surface. It can build and define patterns over an area of 200 x 300 mm onto substrates up to 25 mm thick using single-use printhead cartridges that researchers can fill with their own fluids. Similar in features and operation to the DMP-2800, the floor standing DMP-3000 with its high precision motion control is an inkjet deposition system that can jet fluids using both cartridge-based printheads for small manufacturing volumes to high performance printheads for industrial, high throughput requirements. The DMP-3000 has a printable area of 300 x 300 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm, respectively.
...'>Dimatix Materials Printer Dmp 2800 Manual(12.01.2019)The Fujifilm Dimatix DMP-2800 ink-jet printer is a cost-effective, easy-to-use precision materials deposition system. Ideal applications for the materials printer include: - Material and fluid development and evaluation - Prototype and sample generation - Fluid and substrate interactions evaluation - Product development - Optimization and evaluation of digital patterns - Deposition of biological fluids including cell patterning, DNA arrays, proteomics The DMP-2850 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. The DMP-2850 offers a variety of patterns using a pattern editor program. Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation.
Dimatix Materials Printer DMP-2850 Data Sheet Data & Spec Sheets for Dimatix Materials Printer DMP-2850; Not what you were looking for? Contact Fujifilm with your question about Dimatix Materials Printer DMP-2850. Cleanroom: Fujifilm DMP-2800 Dimatix Printer. Smash mouth songs. Reserve Equipment. Deposition of fluidic materials with typical drop sizes of 1 and 10 picoliters.
Fiducial camera features: - Substrate rotation alignment using reference marks - Positioning of the print origin to match substrate placement - Measurement of features and locations - Inspection and image capture of printed pattern or drops - Cartridge alignment when using multiple cartridges - Matching drop placement to previously patterned substrate.
FUJIFILM Dimatix introduces new DMP-5000 series Materials Printer Tuesday, November 30, 2010 Press release from the issuing company Santa Clara, Calif. - FUJIFILM Dimatix, the leading provider of industrial inkjet printheads, components and systems, introduced today its new Dimatix Materials Printer (DMP). The new DMP-5000 is a large format, non-contact, fluid deposition system capable of jetting a wide range of functional fluids using multiple FUJIFILM Dimatix fluid deposition printheads interchangeably. The new DMP-5000 features a printable area of 500 x 500 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm respectively. The DMP-5000 uses a temperature controlled vacuum platen to accurately register, maintain and thermally manage substrates during printing.
These substrates include plastic, glass, ceramics, and silicon, as well as flexible substrates ranging from membranes, gels, and thin films to paper products. The printer includes an integrated drop visualization system that captures droplet formation images dynamically as droplet ejection parameters are adjusted to produce a tuned printhead and fluid combination. Also, sophisticated electronics allow the printhead to be calibrated on a per nozzle basis to compensate for any channel-to-channel variability. A second camera system allows substrate measurements and alignment, observations of fluid drying behavior, with droplet measurement and placement calculations. The DMP-5000 joins the FUJIFILM Dimatix DMP-2800 and DMP-3000 printers introduced in 2005 and 2009, respectively.
All three printer systems come with a drop watcher, fiducial camera, heated vacuum platen, automated printhead maintenance and cleaning, PC, monitor and easy to use software. The DMP-2800 is a bench-top system designed for micro-precision jetting of functional fluids onto virtually any surface. It can build and define patterns over an area of 200 x 300 mm onto substrates up to 25 mm thick using single-use printhead cartridges that researchers can fill with their own fluids. Similar in features and operation to the DMP-2800, the floor standing DMP-3000 with its high precision motion control is an inkjet deposition system that can jet fluids using both cartridge-based printheads for small manufacturing volumes to high performance printheads for industrial, high throughput requirements. The DMP-3000 has a printable area of 300 x 300 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm, respectively.
...'>Dimatix Materials Printer Dmp 2800 Manual(12.01.2019)