07
апр
Mastercraft digitalmultimeter#52-0060-2 for testing circuits. Posted by donnie martin on Jan 16, 2012. Im looking for a manual for a Mastercraft Pump Model No. 561474, Motor #C48j2ec11c3. Mastercraft Garden; Open Questions: 0 Answers Troy-bolt 208cc two stage power auger will not work.
This is a review of my Mastercraft Multimeter. The model number of this multimeter is 052-0060-2. I have owned this multimeter for a long time and have used it MANY times.
It has a simple design/layout and always gets the job done effectively. I really like the fact that the display features large numbers that are easy to read. It is EXTREMELY easy to use, and has a very small learning curve.
I was able to learn the ins and outs of this multimeter with just a few uses. CONNECT WITH ME: Instagram - SUBSCRIBE TO MY CHANNEL: FREE DIY ADVICE EBOOK: Disclaimer: Some of the links in this description may be affiliate links. All opinions are my own.
• 052-0060-2 POCKET DIGITAL MULTIMETER Read and understand this instruction manual thoroughly before using the product. It contains important INSTRUCTION information for your safety as well as operating and maintenance advice. MANUAL Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.
The flickering (suddenly things go dark) is caused by the new Nvidia drivers, i use 306. Controlador acteck xtreme agj 3200 manual.
• SAFETY INFORMATION This meter has been designed according to IEC 61010 concerning electronic measuring instruments with a measurement category (CAT III 300V) and pollution degree 2. WARNING To avoid possible electric shock or personal injury, follow these guidelines: Do not use the meter if it is damaged. Before you use the meter, ●. • 052-0060-2 contact us 1-800-689-9928 When servicing the meter, use only specified replacement ● parts.
Use caution when working with voltage above 30 V RMS, 42 V ● peak, or 60 V DC. Such voltages pose a shock hazard.
• CAUTION To avoid possible damage to the meter or to the equipment under test, follow these guidelines: Disconnect circuit power and discharge all capacitors before ● testing resistance, diode, continuity and temperature. Use the proper terminals, function and range for your measure- ●. • The equipment is protected throughout by double insulation or reinforced insulation. INTRODUCTION 052-0060-2 multimeter is a compact 3 1/2-digit digital multimeter for measuring DC and AC voltage, DC current, resistance, continuity, diode, and battery. It is easy to operate and is an ideal measurement tool. • FRONT PANEL Display 3 1/2-digit LCD, with a max.
Reading of 1999. ' ' button Used to enter/exit Data Hold mode. • 052-0060-2 contact us 1-800-689-9928 3. Function / Range Switch Used to select the desired function and range as well as to turn on or off the meter. To preserve battery life, set this switch to the 'OFF' position when not using the meter.
• GENERAL SPECIFICATIONS Display: 3 1/2-digit LCD, with a max. Reading of 1999 Negative Polarity Indication: Negative sign ' - ' shown on the display automatically Sampling Rate: About 2 to 3 times/sec Battery: 9 V battery, 6F22 or equivalent, 1 piece Low Battery Indication: '. • 052-0060-2 contact us 1-800-689-9928 DC VOLTAGE OVERRANGE RANGE RESOLUTION ACCURACY INDICATION ±(0.5% + 5) 100 μV 200 mV 1 mV 2000 mV '1' shown on 10 mV 20 V display ±(0.8% + 5) 200 V 100 mV ±(1.0% + 5) • DC CURRENT OVERRANGE RANGE RESOLUTION ACCURACY INDICATION 2000 μ A 1 μA ±(1.0% + 5) '1' shown on 20 mA 10 μA display 100 μA ±(1.2% + 5) 200 mA 10 mA ±(2.0% + 5) 10 A Overload Protection: Fuse, 250 mA/300 V, Fast action Fuse, 10 A/300 V, Fast action Max. • 052-0060-2 contact us 1-800-689-9928 BATTERY RANGE DESCRIPTION TEST CURRENT 1.5 V about 20 mA The working voltage of the battery will be displayed on the LCD so that the about 5 mA quality of the battery can be judged.
Popular Posts
Mastercraft digitalmultimeter#52-0060-2 for testing circuits. Posted by donnie martin on Jan 16, 2012. Im looking for a manual for a Mastercraft Pump Model No. 561474, Motor #C48j2ec11c3. Mastercraft Garden; Open Questions: 0 Answers Troy-bolt 208cc two stage power auger will not work.
This is a review of my Mastercraft Multimeter. The model number of this multimeter is 052-0060-2. I have owned this multimeter for a long time and have used it MANY times.
It has a simple design/layout and always gets the job done effectively. I really like the fact that the display features large numbers that are easy to read. It is EXTREMELY easy to use, and has a very small learning curve.
I was able to learn the ins and outs of this multimeter with just a few uses. CONNECT WITH ME: Instagram - SUBSCRIBE TO MY CHANNEL: FREE DIY ADVICE EBOOK: Disclaimer: Some of the links in this description may be affiliate links. All opinions are my own.
• 052-0060-2 POCKET DIGITAL MULTIMETER Read and understand this instruction manual thoroughly before using the product. It contains important INSTRUCTION information for your safety as well as operating and maintenance advice. MANUAL Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.
The flickering (suddenly things go dark) is caused by the new Nvidia drivers, i use 306. Controlador acteck xtreme agj 3200 manual.
• SAFETY INFORMATION This meter has been designed according to IEC 61010 concerning electronic measuring instruments with a measurement category (CAT III 300V) and pollution degree 2. WARNING To avoid possible electric shock or personal injury, follow these guidelines: Do not use the meter if it is damaged. Before you use the meter, ●. • 052-0060-2 contact us 1-800-689-9928 When servicing the meter, use only specified replacement ● parts.
Use caution when working with voltage above 30 V RMS, 42 V ● peak, or 60 V DC. Such voltages pose a shock hazard.• CAUTION To avoid possible damage to the meter or to the equipment under test, follow these guidelines: Disconnect circuit power and discharge all capacitors before ● testing resistance, diode, continuity and temperature. Use the proper terminals, function and range for your measure- ●. • The equipment is protected throughout by double insulation or reinforced insulation. INTRODUCTION 052-0060-2 multimeter is a compact 3 1/2-digit digital multimeter for measuring DC and AC voltage, DC current, resistance, continuity, diode, and battery. It is easy to operate and is an ideal measurement tool. • FRONT PANEL Display 3 1/2-digit LCD, with a max.
Reading of 1999. \' ' button Used to enter/exit Data Hold mode. • 052-0060-2 contact us 1-800-689-9928 3. Function / Range Switch Used to select the desired function and range as well as to turn on or off the meter. To preserve battery life, set this switch to the \'OFF\' position when not using the meter.
• GENERAL SPECIFICATIONS Display: 3 1/2-digit LCD, with a max. Reading of 1999 Negative Polarity Indication: Negative sign \' - \' shown on the display automatically Sampling Rate: About 2 to 3 times/sec Battery: 9 V battery, 6F22 or equivalent, 1 piece Low Battery Indication: \'. • 052-0060-2 contact us 1-800-689-9928 DC VOLTAGE OVERRANGE RANGE RESOLUTION ACCURACY INDICATION ±(0.5% + 5) 100 μV 200 mV 1 mV 2000 mV \'1' shown on 10 mV 20 V display ±(0.8% + 5) 200 V 100 mV ±(1.0% + 5) • DC CURRENT OVERRANGE RANGE RESOLUTION ACCURACY INDICATION 2000 μ A 1 μA ±(1.0% + 5) \'1' shown on 20 mA 10 μA display 100 μA ±(1.2% + 5) 200 mA 10 mA ±(2.0% + 5) 10 A Overload Protection: Fuse, 250 mA/300 V, Fast action Fuse, 10 A/300 V, Fast action Max. • 052-0060-2 contact us 1-800-689-9928 BATTERY RANGE DESCRIPTION TEST CURRENT 1.5 V about 20 mA The working voltage of the battery will be displayed on the LCD so that the about 5 mA quality of the battery can be judged.
...'>Mastercraft 52 0060 2 Manual(07.04.2019)Mastercraft digitalmultimeter#52-0060-2 for testing circuits. Posted by donnie martin on Jan 16, 2012. Im looking for a manual for a Mastercraft Pump Model No. 561474, Motor #C48j2ec11c3. Mastercraft Garden; Open Questions: 0 Answers Troy-bolt 208cc two stage power auger will not work.
This is a review of my Mastercraft Multimeter. The model number of this multimeter is 052-0060-2. I have owned this multimeter for a long time and have used it MANY times.
It has a simple design/layout and always gets the job done effectively. I really like the fact that the display features large numbers that are easy to read. It is EXTREMELY easy to use, and has a very small learning curve.
I was able to learn the ins and outs of this multimeter with just a few uses. CONNECT WITH ME: Instagram - SUBSCRIBE TO MY CHANNEL: FREE DIY ADVICE EBOOK: Disclaimer: Some of the links in this description may be affiliate links. All opinions are my own.
• 052-0060-2 POCKET DIGITAL MULTIMETER Read and understand this instruction manual thoroughly before using the product. It contains important INSTRUCTION information for your safety as well as operating and maintenance advice. MANUAL Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.
The flickering (suddenly things go dark) is caused by the new Nvidia drivers, i use 306. Controlador acteck xtreme agj 3200 manual.
• SAFETY INFORMATION This meter has been designed according to IEC 61010 concerning electronic measuring instruments with a measurement category (CAT III 300V) and pollution degree 2. WARNING To avoid possible electric shock or personal injury, follow these guidelines: Do not use the meter if it is damaged. Before you use the meter, ●. • 052-0060-2 contact us 1-800-689-9928 When servicing the meter, use only specified replacement ● parts.
Use caution when working with voltage above 30 V RMS, 42 V ● peak, or 60 V DC. Such voltages pose a shock hazard.• CAUTION To avoid possible damage to the meter or to the equipment under test, follow these guidelines: Disconnect circuit power and discharge all capacitors before ● testing resistance, diode, continuity and temperature. Use the proper terminals, function and range for your measure- ●. • The equipment is protected throughout by double insulation or reinforced insulation. INTRODUCTION 052-0060-2 multimeter is a compact 3 1/2-digit digital multimeter for measuring DC and AC voltage, DC current, resistance, continuity, diode, and battery. It is easy to operate and is an ideal measurement tool. • FRONT PANEL Display 3 1/2-digit LCD, with a max.
Reading of 1999. \' ' button Used to enter/exit Data Hold mode. • 052-0060-2 contact us 1-800-689-9928 3. Function / Range Switch Used to select the desired function and range as well as to turn on or off the meter. To preserve battery life, set this switch to the \'OFF\' position when not using the meter.
• GENERAL SPECIFICATIONS Display: 3 1/2-digit LCD, with a max. Reading of 1999 Negative Polarity Indication: Negative sign \' - \' shown on the display automatically Sampling Rate: About 2 to 3 times/sec Battery: 9 V battery, 6F22 or equivalent, 1 piece Low Battery Indication: \'. • 052-0060-2 contact us 1-800-689-9928 DC VOLTAGE OVERRANGE RANGE RESOLUTION ACCURACY INDICATION ±(0.5% + 5) 100 μV 200 mV 1 mV 2000 mV \'1' shown on 10 mV 20 V display ±(0.8% + 5) 200 V 100 mV ±(1.0% + 5) • DC CURRENT OVERRANGE RANGE RESOLUTION ACCURACY INDICATION 2000 μ A 1 μA ±(1.0% + 5) \'1' shown on 20 mA 10 μA display 100 μA ±(1.2% + 5) 200 mA 10 mA ±(2.0% + 5) 10 A Overload Protection: Fuse, 250 mA/300 V, Fast action Fuse, 10 A/300 V, Fast action Max. • 052-0060-2 contact us 1-800-689-9928 BATTERY RANGE DESCRIPTION TEST CURRENT 1.5 V about 20 mA The working voltage of the battery will be displayed on the LCD so that the about 5 mA quality of the battery can be judged.
...'>Mastercraft 52 0060 2 Manual(07.04.2019)